Custom Amp 1×12

Custom Built 1×12 Combo Amp

• Quilted Spanish Cedar and domestic Cherry laminate for cabinet construction
• trimmed with 8th inch Purpleheart binding
• Front baffle consists of a book matched Purple heart and Genuine Mahogany laminate
• Front speaker baffle also features a Figured Maple speaker mount accent/inlay
• Control panel boasts a Figured Maple boarder
• Control panel is made from Canary wood with engraved text for each control panel feature
• Schuelke Custom, bright blue LED illuminated logo carved from Purpleheart
• Top rear panel cover for amplifier chassis custom carved venting in Purpleheart complimented by African Mahogany boarder
• Noctua silent fan powered by either 9 VDC or 12 VDC panel mount power supply
• provides constant air flow to reduce heat from vacuum tubes
• Lower rear panel speaker cabinet panel made from book matched Domestic Cherry
• Symmetric venting carved into wood and reinforced by plated Zinc metal vent
• Performance based grounding scheme to eliminate noise (chassis ground and signal ground are two separate paths to earth ground)
• This grounding method ensures excellent rejection of both EMI (electromagnetic interference) and RFI (radio frequency interference)
• Another benefit is a path of least resistance to earth ground for any unwanted signal that may happen to bleed into the signal path
• Unwanted noise can follow signal ground directly to earth ground rather than try and travel through the resistive signal path
• 5E8A circuit
• (3) 12AY7 Noval pre amp tubes
• (1) 12AX7 Noval pre amp tube
• (2) 6L6G Octal power tubes
• (2) 5U4G Octal rectifier tubes
• Hand wired circuits
• Custom finger jointed wood cabinetry
• One 12″ Celestion Neo Cream back speakers for reduced weight and high fidelity
• Leather handles
• Protective slip cover included
• Backlit Schuelke Custom logo

Basic Amp 2×12

• This offering provides all the hand wired pristine clarity and performance for the gigging musician without having to worry about damaging such intricate wood work found in the fully custom built models
• The 2×12 combo is a hand wired, bare bones reproduction of the 1957 Tweed Twin Low Power 5E8A circuit
• Cold rolled steel chassis true to 1957 specs
• Performance based grounding scheme to eliminate noise (chassis ground and signal ground are two separate paths to earth ground)
• This grounding method ensures excellent rejection of both EMI (electromagnetic interference) and RFI (radio frequency interference)
• Another benefit is a path of least resistance to earth ground for any unwanted signal that may happen to bleed into the signal path.
• Unwanted noise can follow signal ground directly to earth ground rather than try and travel through the resistive signal path
• Cabinet construction includes solid pine as well as custom white tolex and black woven speaker baffle cover
• Custom finger jointed wood cabinetry
• Two 12″ Celestion Neo Cream back speakers for reduced weight and high fidelity
• Leather handles
• Pre Amp Tubes: JJ ECC83/12AX7 (1), JJ 12AY7 (3) Power tubes: JJ 6L6GC (2)JJ Rectifier tubes: 5U4 (2)
• Protective slip cover included

Custom Amp Head & 2×12 Cabinet

Custom built head and 2×12 speaker cabinet.

• Figured Maple Ambrosia/Maple Ambrosia laminate cabinet construction
• Bolivian Rosewood and Maple Ambrosia laminate head faceplate
• Schuelke Custom logo and control panel descriptions relief carved directly into laminate
• Head back panel Maple Ambrosia w/ Maple Ambrosia trim
• Zync plated metal vent for heat dissipation of head unit
• Maple Ambrosia w/ Maple Ambrosia trim speaker cabinet rear panel
• Air tight speaker cabinet for natural compression and extremely focused sound
• Custom dovetail joinery wood cabinetry
• Celestion Neo Cream back speakers for reduced weight and high fidelity
• Leather handles
• 5E8A Hand wired circuit
• Circuit is rehoused in an aluminum chassis
• All components and transformers are top mounted rather than suspended in a cold rolled steel chassis like the the original 5E8A circuit combo amp (Model# SC-BA212)
• Performance based grounding scheme to eliminate noise (chassis ground and signal ground are two separate paths to earth ground)
• This grounding method ensures excellent rejection of both EMI (electromagnetic interference) and RFI (radio frequency interference)
• Another benefit is a path of least resistance to earth ground for any unwanted signal that may happen to bleed into the signal path.
• Unwanted noise can follow signal ground directly to earth ground rather than try and travel through the resistive signal path
• (3) 12AY7 Noval pre amp tubes
• (1) 12AX7 Noval pre amp tube
• (2) 6L6G Octal power tubes
• (2) 5U4G Octal rectifier tubes
• Protective slip cover included

Hand Wired Tube Spring Reverb

• 6G15 tube driven spring reverb unit
• JJ ECC83/12AX7 (1), JJ ECC81/12AT7 (1)
• Reverb Tube :JJ 6V6S (1)
• Rectifier Tube :None – Solid-state
• Heyboer transformers
• Standalone hand wired tube spring reverb unit
• Traditional solid pine construction, black tolex and silver “drip clothe” face
• Relief carving of Schuelke Custom Logo on Purpleheart and Zebrawood laminate
• Mounted with brass screws
• Best sounding hand wired reverb unit on the market